FAIL (the browser should render some flash content, not this).

 

FAN  
   

Link

Gallery

 

 

 

Press Screw Separator 3.2-520

 

Standard extent of supply 3.2-520

 - Inlet body and screen body cast iron

 - Pressflange with output regulator in stainless steel,

   with 4 weights

 - Stand of stainless steel for assembly on the ground

 - 5" filtrate connecting pipe

 - Screen reinforced 520

   slot size selectively

 ( Auger 200/800/1100, 5-10, TD, 2SFK (F10412180)

 - Oscillator, inlet pipe size 4"

 - Parallel shaft helical geared motor 5,5kW (F10632650)

 

 

Press Screw Separator 3.2-780 / 3.2-780S

 

Standard extent of supply 3.2-780 / 3.2-780S

 - Inlet body and screen body cast iron

 - Pressflange with output regulator in stainless steel, with 4 weights

 - Stand of stainless steel for assembly on the ground

 - 5" filtrate connecting pipe

 - Screens reinforced 520 RE and HD 260; slot size selectively

 - Auger PSS 3.2-780: 200/1060/1300, 5-10, TD, 2SFK (F10412210)

 - Auger PSS 3.2-780S: 200/1060/1300, 10-10, TD, 2LFK (F10432780)

 - Oscillator, inlet pipe size 4"

 - Parallel shaft helical geared motor PSS 3.2-780: 5,5kW (F10632650)

 - Parallel shaft helical geared motor PSS 3.2-780S: 7,5kW (F10632670)

 

 

Press Screw Separator 3.2-1040 / 3.2-1040S

 

Standard extent of supply 3.2-1040 / 3.2-1040S

 - Inlet body and screen body cast iron

 - Pressflange with output regulator in stainless steel, with 4 weights

 - Stand of stainless steel for assembly on the ground

 - one 4" and one 5" filtrate connecting pipe

 - Screens reinforced 520 RE and 2x HD 260; slot size selectively

 - Auger 200/1320/1620, 10-10, TD, 2LFK (F10432106)

 - Oscillator, inlet pipe size 4"

 - Parallel shaft helical geared motor PSS 3.2-1040: 7,5kW (F10632670)

 - Parallel shaft helical geared motor PSS 3.2-1040S: 11kW (F10632680)

 

 

 

 

 

Bedding Recovery Unit

 

standard extent of supply

• 1 x ISO 20’ Container, completely insulated for use with low ambient temperatures (as low as  –35°C)

• 1 x Separator PSS 3.2-780 BRU, press-screw separator specially adapted for the use with the BRU / for flushing systems PSS 3.2-1040 BRU

• 1 x gear motor F4,8kW, configured for application in the BRU

• 1 x screen basket 520 SI 1,00 HD, 1x 260 HD, Heavy Duty from stainless steel, for high operating pressures and long lifetimes

• 1 x screw BRU-Separator LFK , with TD- coating and screw optimally adapted for the application in the BRU

• 1 x break-through protection for press-screw Separator to automatically give a warning signal in case of a malfunction

• 1 x switch cabinet BRU; for the central control of all the BRU components

• 1 x level control of the drum filling: filling level limit switch RN3002 with a monitoring function, made of stainless steel

• 1 x fan for pipe insertion 150mm to ventilate the 20’ containers

• 1 x screw conveyor BRU with gear motor 1,5kW, lid hinged at the outlet, product touching parts made of 1.4301 (AISI 304), mounting position 15 degrees rising

 

• 1 x Container 40‘, complete thermal insulation of the process

• 2 x service doors, enable easy access for servicing

• 1 x  inlet funnel to carry the material into the BRU drum, made of stainless steel

• 1 x drum frame, hot-dip galvanized

• 1 x  BRU drum with specially adjusted conveyor and recovery system, completely made of stainless steel

• 1 x  parallel shaft gear motor 6kW incl. brake for the drive of  the BRU drum

• 1 x  temperature sensor Pt100, for real-time temperature monitoring of  the BRU drum

• 1 x ventilator to control the aerobic process for the production of the bedding material

• 1 x stair with pedestal incl. rail

 

 

 

SUBMERSIBLE MOTOR MIXER MSXH - industrial version

Standard extent of supply MSXH

 - Submersible motor mixer with 400 V / 50 Hz submersible motor, 1450 min-1

 - Two-wing thrust propeller - stainless steel

 - Mounting bracket with grade adjustment - in stainless steel

 - Planetary gears, mechanical seal in oil bath, safe from running dry

 - Winding thermostat ( PTC-resistors)

 - termperature class H, tempreture of medium 65°C

 - seal indicator sensors for planetary gear

 - 12 m cable in especially durable design with

    traction relief and 6m cable protective tube - without plug

- Motor protection is only guaranteed with original BAUER control unit

   with built-in thermal tripping relay for PTC thermistor detectors and

   overcurrent relay ( accessory)

 

 

 

 

 

Slurry Pump MAGNUM S

Standard extent of supply

- Volute housing of grey cast iron

- Cutting bell with large, ripped intake

- Cutter and cutting bell of spheroidal graphite cast iron with hardened cutting edges

- Pump shaft of stainless steel with angular ball bearings and double mechanical seal running of silicon carbide in oil bath

- Three-phase submersible motor, four poles for 380 V / 50 Hz / IP 68 

- Motor housing of grey cast iron, Motor winding with three PTC thermistor detectors, insulation class F, heavy - duty rubber cable ( 8m ), 12 x 2,5,

  screwed cable joint with strain relief

- Motor protection is guaranteed only with FAN control unit ( accessory) with built-in thermal tripping relay for PTC thermistor detectors and overcurrent

- Delivered without plug

 

 

 

 

Subersible motor pump MAGNUM CSP and ESP

 

  CSP (cutter submersible pump) with cutting device

  ESP (effluent submersible pump) without cutting device

 

 Standard extent of supply

- Submersible motor pump with adjustable cutting device (at CSP)

- spiral housing and Spiralgehδuse and suction bell made of cast iron

- CSP: Impeller and cutting disc made of chrome steel

- ESP: Impeller made of spheroidal cast GGG60

- Pump shaft made of stainless steel with angular ball bearing

- Three phase current - submersible motor 4-polar for 480V/60Hz / IP 68  with 8m cable 12G x 2,5²; 1m Schcable protective tube and strain relief

- Sealing on motor end: mechanical seal in oil bath

- Sealing on pump end: closed and stainless steal mechanical seal

- ( Seal ring and counter ring made of SIC - SIC )

- Motor temperature class H, with triple PTC resistor 180° C, for thermic winding protection

- Medium temperature until 65° C

- Leakage sensor looms into oil reservoir (additional motor protection)

- Motor and cable strand on junction plate; strand of leak oil sensor and PTC on ceramic clamp connected in a terminal box casted in casting compound

- Motor protection guaranteed by the original BAUER control system (accessory) with installed thermistor release relay for PTC resistors and overcurrent relay, as well as electronic monitoring system for leakage sensor.